Obex Products

  • Vital Signs Infusable® – Pressure Infusor

    • Patient-dedicated to minimise the spread of nosocomial infections via touch contamination
    • Large inflation bulb has rapid recovery for quick and easy inflation
    • Easy-to-use stopcock and bulb-to-tube fitted seal prevent leaks
    • High visibility patented gauge accurately indicated bladder pressure. Nylon netting makes loading easy and permits a clear view of fluid level.
  • Vital Signs Kurtis MSD™ Meconium Suction Device

    When seconds count and infant safety is paramount

    The Kurtis MSD, developed by a practicing neonatologist was specifically designed to meet the rigorous demands of the suctioning procedure – quickly safely, efficiently and at less cost than conventional means.

    It requires no set up time at all. It comes pre-assembled and instantly ready for use. It requires only one person to operate as a suction catheter and can double as an artificial airway for positive pressure.

  • Vital Signs Light Wand™ Illuminating Stylet

    • Exceptionally bright light provides excellent verification of positioning even during difficult intubations
    • The surface temperature of the ET tube will not rise above 42°C
    • Lightweight for portability and storage
    • Flexible lighted stylet for use with or without a laryngoscope
    • No batteries to replace – light will function continuously for approximately three hours before being discarded
  • Vital Signs Limb-O™

    The Limb-O is a uni-limb circuit with a septum in the centre. The streamline design minimises the clutter of a two limb circle circuit. It can be used in both adults and paediatrics down to 4.5kg.

    It has three important benefits:

    • LIGHT WEIGHT – Less plastic means less weight and torque on the patient’s airway management device; Limb-O weighs 34% less than coaxial circle circuits and 25% less than traditional circle circuits.1
    • LOWER COMPLIANCE – The presence of a septum in Limb-O decreases compliance in the circuit to significantly increase delivered volume . . . without sacrificing drape.
    • THERMALLY EFFICIENT – Bench testing suggests the transfer of heat from the expiratory to the inspiratory limb of 6.2°C at 4L/min flow rates

    It also has the additional features available of internal or external CO² monitoring line.

  • Vital Signs Pi’s Pillow™

    Pi’s Pillow creates the ideal patient position for intubation.

    Comfort

    Pi’s Pillow is designed as a two-piece system, consisting of a removable cushion (on top) and a base (on bottom) that is very comfortable for the patient prior to induction.

    Positioning

    The design of the pillow calls for the slope side of the pillow to be beneath the patient’s shoulders and upper back, that is, the upper edge of the base should be under the atlanto-occipital joint.

    As soon as the patient loses consciousness the top cushion is removed or it is moved down according to the desired degree of head and neck extension. This stabilises the patient’s head and places the neck in the sniffing position to facilitate intubation, ventilation or insertion of a laryngeal mask.

    Material

    The pillow is latex-free and made of a high grade polyurethane foam. Each pillow comes vacuum packed for ease of storage.

    Sizes

    Available in Extra Large, Long; Extra Large, Short; and Large.

  • Vital Signs Respirgard II™ Medication Nebuliser

    • One-way flow valves and expiratory filter ensure caregiver protection
    • Optimal particle size for proper deposition
  • Vital Signs Vital Temp Monitoring Devices

    • A family of temperature monitoring options available from one source
    • Oesophageal scope with temperature – superior acoustic characteristics deliver enhanced heart and breath sounds while allowing core body temperature to be monitored.
    • Rectal/General purpose probe – designed for safe oesophageal, rectal or pharyngeal use.
    • Skin temperature probe – mylar backing protects the probe from cooling air currents, increasing placement options.
    • Dual channel temperature monitor – accepts either 400 or 700 series thermistor probes, permits monitoring of two sites simultaneously, permits ambient room temperature measurement and can function as an elapsed timer.
    • Liquid Crystal Display skin strip – accurately trends the patient’s skin temperature, displaying easy to read graphics in both Centigrade and Fahrenheit.
  • Wassenburg® Drying and Storage Cabinets

    Drying and conditioning prevents recontamination and formation of biofilms resulting in the safe use of endoscopes, also providing safe storage for endoscopes, including the essential registration and traceability.  Two available drying and storage cabinets are available to suit your individual requirements:

    • Dry300D  – has been developed around best practices and proven drying efficacy
    • Dry320 – a patented system that has been developed to provide ergonomic handling for its users, optimum endoscope positioning and proven drying efficacy
  • Wassenburg® Washers and Disinfectors

    Wassenburg® is the specialist in flexible endoscope reprocessing for more than 30 years.  In 2013 HOYA Group set up a joint venture with Wassenburg Medical B.V. in the field of AER (Automatic Endoscopy, Reprocessing).  All Wassenburg Endoscope washer-disinfectors are manufactured to the highest standards and meet the requirements of the EN ISO 15883 parts 1 and 4 and the HTM 01-06.  An effective washing and disinfection process is crucial, yet the logistics around this process are just as important.  Both the drying and conditioning cabinets as well as Process Manager, the traceability and management software are therefore a vital part of the total reprocessing process of endoscopes between patient treatments.

  • Wassenburg® WD440 PT Pass Through Endoscope Washer-Disinfector

    Every one of our washer-disinfectors is designed for controlled cleaning and disinfection of flexible endoscopes.  Our WD440 PT is a safe choice in terms of logistics, traceability and user friendliness.

  • Zenith Flex®

    Suprarenal Fixation with Anchoring Barbs

    Established suprarenal design with anchoring barbs is the benchmark for stability and graft-to-vessel attachment.

    Flex Design

    Increased gap length allows aortic section to conform to a tighter radius resulting in a 40-68% decrease in kink radius.

    Radiopaque Band

    Identifies precise location of sheath’s distal tip.

    Flexor® Introducer Sheath

    Kink-resistant technology with low-friction hydrophilic coating.

    AQ® Hydrophilic Coating

    Dramatically reduces friction to enhance deliverability, while Flexor’s large, low-friction PTFE-coated lumen facilitates device delivery.

    Captor® Haemostatic Valve

    Unique design inhibits blood reflux.

  • Zenith Flex®

    Suprarenal Fixation with Anchoring Barbs

    Established suprarenal design with anchoring barbs is the benchmark for stability and graft-to-vessel attachment.

     

    Flex Design

    Increased gap length allows aortic section to conform to a tighter radius resulting in a 40-68% decrease in kink radius.

     

    Radiopaque Band

    Identifies precise location of sheath's distal tip.

     

    Flexor® Introducer Sheath

    Kink-resistant technology with low-friction hydrophilic coating.

     

    AQ® Hydrophilic Coating

    Dramatically reduces friction to enhance deliverability, while Flexor's large, low-friction PTFE-coated lumen facilitates device delivery.

     

    Captor® Haemostatic Valve

    Unique design inhibits blood reflux.